Enable remote management on D-Link series router

How do I enable remote management on D-Link series router? 

Today We will see that how to enable remote management on D-Link Series Router.These are modem feature which is help to access modem online from external network. But it's make your network unsecure because it's enable to access network from outside and password got so they can do anything.

Please follow step by step to enable remote management on D-link series router:

Step 1: Open a web browser and type the IP address of the D-Link series router into the address bar (default is

Step 2: The default username is admin (all lower case) and the default password is blank (nothing). Click OK.

Step 3: Click on the TOOLS tab and navigate down to the ADMINISTRATION section.

Step 4: Check the box to Enable Remote Management.

Step 5: Enter the desired port in the Remote Admin Port dialogue box. You can also leave the default port at 8080

Step 6: Click on Save Settings to save your settings.

Once the Settings have been saved. To access your router remotely, from a web browser enter: http://<your wanip>:8080


You can find your WAN IP by clicking on the STATUS tab. It will be displayed under the WAN Section.



Please leave your comments...... Thanks