Configuration telnet on cisco router

How to setup console and telnet on cisco router?


Router1>en
Router1#config t
Enter configuration commands, one per line.  End with CNTL/Z.
Router1(config)#int fa 0/0
Router1(config-if)#ip add 10.0.0.1 255.0.0.0
Router1(config-if)#no shut
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
Router1(config-if)#do wr
Building configuration...
[OK]
Router1(config-if)#exit






Router0>en
Router0#config t
Enter configuration commands, one per line.  End with CNTL/Z.
Router0(config)#int fa 0/0
Router0(config-if)#ip add 10.0.0.2 255.0.0.0
Router0(config-if)#no shut

Router0(config-if)#exit
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router0(config)#line console 0
Router0(config-line)#password asd@123
Router0(config-line)#login
Router0(config-line)#exit
Router0(config)#line vty 0 4
Router0(config-line)#password just@123
Router0(config-line)#login
Router0(config-line)#exit
Router0(config)#enable password cisco
Router0(config)#do wr
Building configuration...
[OK]


Share:

0 comments

Please leave your comments...... Thanks