EIGRP configuration

Written by Post Comment

How to configure EIGRP Routing on Packet tracer?


EIGRP:- EIGRP stand for Enhanced Interior Gateway Routing Protocol.

-          Distance Vector (Hop Count)
-          Link state Routing Protocol ( Best Bandwidth)





It is a Hybrid Routing Protocol because it protocol works on distance vector and Link state basis. We can connect 255 hops in EIGRP routing. It works on reliable transfer protocol and bandwidth.
There are three tables in the EIGRP:-

You will see video to configure EIGRP Routing protocol on packet tracer.





1)      Topology Table
2)      Neighbor Table
3)      Routing Table




Router0> enable
Router0# configure terminal
Router0(config)# int  fa 0/0
Router0(config-if)# ip add 11.0.0.1 255.0.0.0

Router0(config-if)# no sh
Router0(config-if)# exit
Router0(config)# router eigrp 100
Router0(config-router)# network 11.0.0.0
Router0(config-router)# do wr



Router1> enable
Router1# configure terminal
Router1(config)# int  fa 0/0


Router1(config-if)# ip add 11.0.0.2 255.0.0.0
Router1(config-if)# no sh
Router1(config)# int  fa 0/1
Router1(config-if)# ip add 12.0.0.1 255.0.0.0
Router1(config-if)# no sh
Router1(config)# int  fa 1/0
Router1(config-if)# ip add 13.0.0.1 255.0.0.0
Router1(config-if)# no sh
Router1(config-if)# exit
Router1(config)# router eigrp 100
Router1(config-router)# network 11.0.0.0
Router1(config-router)# network 12.0.0.0
Router1(config-router)# network 13.0.0.0
Router1(config-router)# do wr



Router2> enable
Router2# configure terminal
Router2(config)# int  fa 0/0
Router2(config-if)# ip add 14.0.0.2 255.0.0.0
Router2(config-if)# no sh
Router2(config)# int  fa 0/1
Router2(config-if)# ip add 13.0.0.2 255.0.0.0
Router2(config-if)# no sh
Router2(config-if)# exit
Router2(config)# router eigrp 100
Router2(config-router)# network 13.0.0.0
Router2(config-router)# network 14.0.0.0
Router2(config-router)# do wr


Router3> enable
Router3# configure terminal
Router3(config)# int  fa 0/0
Router3(config-if)# ip add 12.0.0.2 255.0.0.0
Router3(config-if)# no sh
Router3(config)# int  fa 0/1
Router3(config-if)# ip add 14.0.0.1 255.0.0.0
Router3(config-if)# no sh
Router3(config-if)# exit
Router32(config)# router eigrp 100
Router3(config-router)# network 12.0.0.0
Router3(config-router)# network 14.0.0.0
Router3(config-router)# do wr


Tags:

Share:

0 comments

Please leave your comments...... Thanks